In Stock
Ex Tax: $351.56


    This fits your.
  • to make sure this fits.
  • Intel? Edison module:
  • Uses a 22nm Intel? SoC that includes a dual core, dual threaded Intel? Atom? CPU at 500MHz and a 32-bit Intel? Quark? microcontroller at 100 MHz. It supports 40 GPIOs and includes 1GB LPDDR3, 4 GB EMMC, and dual-band WiFi and BTLE on a module slightly larger than a postage stamp.
  • The Intel Edison module will initially support development with Arduino* and C/C++, followed by Node.JS, Python, RTOS, and Visual Programming support in the near future.
  • It includes a device-to-device and device-to-cloud connectivity framework to enable cross-device communication and a cloud-based, multi-tenant, time-series analytics service.
  • Has an SD card connector, micro USB or standard sized USB host Type-A connector(via mechanical switch), Micro USB device, 6 analog inputs, and 20 ditial input/output pins, 1x UART, 1x I2C, and 1x ICSP 6-pin header (SPI) Power jack with 7V-15V DC input.


Form factor: Board with 70-pin connector
Dimensions(Intel Edison module): 32.5 x 25.0 x 3.9 mm
Dimensions(Intel Edison for Arduino): 127.0 x 72.0 x 12.0 mm
Operating temperature: 0 to 40 degC
Connector: Hirose DF40 Series (1.5mm, 2.0mm, or 3.0mm stack height)
Max Memory size: 4GB
Memory type: DDR3, Nand Flash
Physical add. Ext.: 32-bit
# of DIMMs: 0
ECC Memory supported: NO
External Interfaces
Total of 40 GPIOs which can be configured as:
SD Card: 1 interface
UART: 2 Controllers
I2C: 2 Controllers
SPI: 1 Controller with 2 chip select
I2S: 1 Controller
GPIO: Additional 12 (with 4 capable of PWM)
USB2.0: 1 OTG Controller
Clock Output: 32 KHz, 19.2 MHz
Major Edison Components
SoC: 22nm Intel SoC includes: a dual core, dual threaded Intel Atom CPU at 500MHz, and a 32-bit Intel Quark microcontroller at 100 MHz
RAM: 1 GB LPDDR3 POP memory
Flash Storage: 4 GB eMMC
WiFi: Broadcom 43340 802.11 a/b/g/n, Dual-band (2.4 and 5 GHz), On board antenna or external antenna SKU configurations
Bluetooth: BT 4.0
Input: 3.3V - 4.5V
Output: 100ma @3.3V and 100ma @ 1.8V
Power: Standby (No radios): 13mW, Standby (BT 4.0): 21.5mW, Standby (WiFi): 35 mW
Firmware + Software
CPU OS: Yocto Linux v1.6
Development Environments:
Arduino IDE, Eclipse supporting: C, C++ & Python, Intel XDK supporting: Node.JS & HTML5
Development Environments: MCU SDK and IDE

Brand Seeedstudio
Item model number CASS110060422
Shipping Weight 798 g
Date First Available 1 Jun. 2016

Reviews (0)

Write a review

Note: HTML is not translated!
    Bad           Good